For Sale QIAGEN Description QIAcube Connect is designed to perform fully automated purification of nucleic acids and proteins DNA Extractor

This DNA etractor can out of a publicaly run heath facility lab. It appears function. There are minor blemishes on the sides and top if the unit consistent with use.

The German made QIAcube is designed to perform fully automated purification of nucleic acids and proteins in molecular biology applications. The system is intended for use by professional users trained in molecular biological techniques and the operation of QIAcube

Features:
Automates over 80 QIAGEN kits with over 140 standard protocols for DNA, RNA and protein sample processing
Optional protocol customization expands the use to over 3000 protocols
Get reproducible results with less hands-on time
Monitor runs remotely, for quick response times, through the QIAsphere App

QIAcubes are highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as:

Applications:
Sequencing/sequencing analysis
Gene expression analysis
Genotyping
Proteomics
Microbiome research
Human identification and forensics

Specifications

Serial #: 12920
Technical data
* Power: 100–120 V AC, 50/60 Hz, 650 VA Mains supply voltage fluctuations are not to exceed 10% of nominal supply voltages.
Note: The apparent power can exceed 650 VA for up to 2 seconds during the centrifuge acceleration and can reach an approximate value of 1000 VA.;
* Fuse: 2x T6.3A L 250V;
* Over-voltage category: II
* Operating temperature 18 to 28ºC (64.4 to 82.4ºF)
* Relative humidity 15–75% (non-condensing)
* Place of operation For indoor use only
* Storage conditions Temperature: 15ºC to 30ºC (59ºF to 86ºF) in manufacturer’s package; Relative humidity: Max. 75% (non-condensing); Environmental class: 1K2 (IEC 60721-3-1)
* Dimensions (hood closed): width 65 cm (25.6 in.), height 58 cm (22.8 in.), depth 62 cm (24.4 in.);
* Dimensions (hood open): width 65 cm (25.6 in.), height 86 cm (34 in.), depth 62 cm (24.4 in.);
* Weight: 71.5 kg (157.6 lb.)
* Centrifuge 10,640 rpm maximum, 12,000 x g maximum, swing-out rotor maximum 45°, 12 rotor positions
* Shaker Speed 100–2000 rpm, amplitude 2 mm, heating range of ambient temperature to 70°C (158°F), ramp-up time of <5 minutes from ambient temperature to 55°C (±3°C).
Difference in the temperature detected by the internal sensor and the temperature of the sample liquid is approximately –2°C.
* Pipetting system Syringe size 1 ml, pipetting range 5–900 µl
* Table capacity Up to 12 samples per run
* Touchscreen 10.4” TFT Touchscreen, active area 211.2 x 158.4 mm, resolution 800*600 SVGA
* Data output USB stick: USB2.0; Compatible OS: Windows 8, Windows 7, Windows Vista, Windows XP (SP3 or later); Mac OS x 10,1 or later;
* Operating temperature range: 0ºC to 35ºC;
* Operating humidity range: 10 to 90% (with no condensation);
* Storage temperature range: –20ºC to 60ºC (–4ºF to 140ºF);
* Storage humidity range: 10 to 90% (with no condensation); Formatting: FAT32
* UV lamp Wavelength: 278nm; Optical power: 200-300mW

Special Features
* Handheld scanner (not included);
* Scan pattern: Area Image (838 x 640-pixel array); Motion tolerance: Up to 610 cm/s (240 in/s) for 13 mil UPC at optimal focus;
* Symbol contrast: 20% minimum contrast
* Decode capability: Reads standard 1D, PDF, 2D, Postal and OCR symbology
* Software: QIAGEN protocols are pre-installed on the QIAcube


Please call with any questions in advance of purchase

US purchasers are not normally subject to state and local taxes. Due to a dynamic politicized border tariff situation, buyers in the US should satisfy themselves that this will or will not be subject to some sort of taxation/tariffs. We estimate shipping costs are going to be $375 to most commercial locations in the Lower 48 US states. At the time this listing is being posted, no US or Canadian or EU initiated tariffs or taxes are applicable and there would be no boarder related charges applied to this item because of its low value. New boarder related fees and tariffs (25%?) are beyond the seller's control and all but one man's control at this point, so they are the responsibility of American buyers.

Canadian buyers should write for an invoice in Canadian $. Shipping costs with possibly be reduce reduced. Federal sales taxes (GST) will added to the item cost and shipping expense. Payment will be by PayPal or e-transfer.

Return Policy

7 Day Return Policy. Customer must pay the return shipping costs when returning a product. If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.