THIS 3.01 INFINITI SYSTEM IS NOT IN STOCK AT THE MOMENT. WE HAVE SEVERAL SYSTEMS 2.06.
Infiniti 3.01 Manufactured in 2013, this Alcon Infiniti Phacoemulsifier has been fully rebuilt and tested to factory specifications.
Featuring the latest 3.01 software version, the Alcon Infiniti Vision System is capable of (HSV) high-speed vitrectomy reaching 2500 cuts per minute.
In addition to the high-speed vit, the latest software offers an IOL (Intraocular lens) injector port unavailable on previous models.
Included in this listing are the Alcon Infiniti Vision System, foot pedal, foot pedal cable, operators manual, and dust cover. For an additional charge, we also offer handpieces (OZil, Ultrasonic, Neosonic, IOL injector), remote control, and video overlay system.
We have in stock all Infiniti parts and all domestic Alcon Infiniti vision systems purchased through our company are backed by a six-month warranty!
---------------------------------------------
THE LISTED ERROR CODES ARE SHOWN ON THE INFINITI VISION SYSTEM DISPLAY PANEL WHEN THE SYSTEM DETECTS A PROBLEM. THE ERROR CODES ARE SEPARATED BETWEEN ADVISORIES, WARNINGS, AND FAULTS.
Alcon Infiniti Error Code 160: Reinsert FMS. Replace FMS if Problem Persists.
Alcon Infiniti Error Code 161-164: Please Check Fittings and Reprime. Replace FMS if Problem Persists.
Alcon Infiniti Error Code 165-167: Flow Obstruction. Please Check Handpiece Free Flow
Alcon Infiniti Error Code 169: Irrigation Pressure is Low. Please Check Bottle and Fittings.
Alcon Infiniti Error Code 170: Reflux Terminated. Reflux Fluid Volume Depleted.
Alcon Infiniti Error Code 171: Excessive Pressure in Drain Bag. Replace FMS.
Alcon Infiniti Error Code 175-176: Infusion Pressure Sensor Calibration Error. Remove FMS. If Problem Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 180: Invalid FMS ID. Replace FMS.
Alcon Infiniti Error Code 181: Excessive Ambient Light. Unable to Calibrate FMS ID Sensors.
Alcon Infiniti Error Code 182: Excessive Ambient Light. Unable to Read FMS ID.
Alcon Infiniti Error Code 183: Remove MultiPak FMS, See MultiPak Directions for Use
Alcon Infiniti Error Code 250: Tuning in Air
Alcon Infiniti Error Code 251: Insert Handpiece
Alcon Infiniti Error Code 252: Multiple Handpieces Detected. Remove a Handpiece.
Alcon Infiniti Error Code 254: Loose Tip
Alcon Infiniti Error Code 256-270: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 271: Two Handpieces Detected. Remove a Handpiece.
Alcon Infiniti Error Code 272-274: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 276: Ultrasound Error. Release Treadle and Retry. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 277: Handpiece Disconnected While Applying U/S Power. Release Treadle, then Insert and Tune Handpiece.
Alcon Infiniti Error Code 278: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 279: Unknown Handpiece Detected.
Alcon Infiniti Error Code 280: Unsupported Handpiece Detected.
Alcon Infiniti Error Code 281: Cautery Compliance Error. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 282: Coagulator Error. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 350: Footswitch Failure Detected. Check Footswitch, Clean Under Rear Section of Treadle, and Remove Debris if Present. (Reference Maintenance Section of Operators Manual.) Ensure Treadle is Not Depressed, then Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 351: Footswitch Failure Detected. Check and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 352: Footswitch Failure, Replace Footswitch.
Alcon Infiniti Error Code 353: Footswitch Failure Detected, Check and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 450: Footswitch is Depressed, Release Footswitch Before Pressing Prime FMS, Fill, or Test Handpiece.
Alcon Infiniti Error Code 451: Can Not Recognize Footswitch. Please Check Footswitch Connection and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 460: Please Install Footswitch.
Alcon Infiniti Error Code 461: Infiniti ® Backup Power Service Needed, Contact Alcon Technical Services.
Alcon Infiniti Error Code 463: Invalid Language(s) Found During Initialization. One or More Installed Languages May Not be Available.
Alcon Infiniti Error Code 464: The Language Specified by System Settings is Invalid.
Alcon Infiniti Error Code 465: The Tune Sequence was Interrupted by removal or the Handpiece.
Return Policy
14
